Pneumatic dispenser for 1 pallet 800×600

The pneumatic dispenser for 1 pallet (the model for the 800×600 mm pallets) optimizes the flow, saves the necessary space needed otherwise for their storage, and keeps this space in order.

The system works with compressed air, needing a power of 6-7 bars + 100-240 V for the control panel.

Using the pallets magazine, the handling time/ pallet is significantly reduced, as well as the pallets breakage rate and the number of medical leaves caused by physical efforts when manually handling the pallets, decreases.

Reference:

Pallets: 800x600 mm

All specifications

Description

There can be automatically stacked pallets with 800×600 mm dimensions, the height being customized depending on the needs.

The operator needs a minimal training to use it.

This allows the loading and unloading from the stack of only one pallet or of the whole stack. Using this pallet magazine, the operators can handle the pallets at ground level only using the pallet truck, being no need to use the forklift.

The dispenser has a capacity for 15 pallets, with a maximum load of 500 kg. The system has safety frames on three sides, making any operation safe.

For more details regarding the intralogistics pallet dispenser, please consult the technical details presented in the Documentation.

Technical specifications

Compressed air supply6-7 bar
Consumption36 liters / cycle
Power at the source100-240 VAC 50-60 Hz
Stand-by consumption16 W
Consumption during operations20 W
Noise level70 dB (A)
Safety max.16 A D01
Pneumatic componentsSMC
PLCSiemens S7-1200
The cleaning will be done only with weak alkaline agents. The dispenser will not be washed with a jet of water, but with a wet cloth.